BOAT TRANSPORT TRAILERS


For 10+ years, Jet Company has been manufacturing boat transport and marine lowboy trailers designed to fit our customers’ specific needs. These trailers have the capacity to haul multiple boats to dealerships. In addition, the main deck is incredibly low to the ground, and significantly optimizes overhead clearance of the load. Options include slant necks, axle spacing, custom side rails, and decking.

 Please contact us for more information about the trailer that will assist you in your application.

Request A Quote

Fill out this form, or call
(515) 332-3117 for a quote.


    Features Options Specifications Line Drawings
    Image Gallery

    Frame Construction

    Crossmembers

    Siderail

    Rubrail

    Stake Pockets

    Kingpin

    Axles

    Suspension

    Wheels

    Landing Legs

    Mud Flaps

    Wire Harness

    LED lights

    Corrosion Resistant Paint System

    Two Fabricated High Strength Steel I-Beams. Automatically Welded, top, bottom, and both sides, upper deck, neck, and lower deck are all one continuous welded assembly.

    Steel: Structural High Strength 4” I-Beam, welded to the main beam, on 16", 14” or 12” centers standard.

    Steel: 6" steel channel, 8.2 lbs./ft.

    Steel: 3/8" x 2" steel.

    Spaced 24" apart with pipe-spool. ID 1-5/8" x 3-7/16" is common, other spacing and configurations available.

    15” setting standard. Other settings available.

    30” rear axle setting standard. Hub Pilot, Axle Beam ratings: 22,500 lb rating for spring suspensions, 24,000 lb rating for air ride suspensions

    Air Ride, Rated @ 25,000# with ABS, available in closed tandem 54”

    8.25 x 17.5 Steel, White powder coat, 10 Holes, nut 33mm

    Two speed landing legs. Ultimate load capacity 140,000 lbs.

    Anti-sail with Jet Trailers logo, 2 located rear at the rear of trailer on a 49” tandem or both axles on 10'1" spread

    Factory sealed with internal ground to reduce corrosion and maintenance.

    Bullet style clearance and marker, Side turn signal, 4” round tail light, license plate light. Long lasting, Reduced maintenance, very bright.

    Trailer is cleaned and chemically treated with a corrosion resistant coating for a matte black finish.

    Features

    Frame Construction

    Two Fabricated High Strength Steel I-Beams. Automatically Welded, top, bottom, and both sides, upper deck, neck, and lower deck are all one continuous welded assembly.

    Crossmembers

    Steel: Structural High Strength 4” I-Beam, welded to the main beam, on 16", 14” or 12” centers standard.

    Siderail

    Steel: 6" steel channel, 8.2 lbs./ft.

    Rubrail

    Steel: 3/8" x 2" steel.

    Stake Pockets

    Spaced 24" apart with pipe-spool. ID 1-5/8" x 3-7/16" is common, other spacing and configurations available.

    Kingpin

    15” setting standard. Other settings available.

    Axles

    30” rear axle setting standard. Hub Pilot, Axle Beam ratings: 22,500 lb rating for spring suspensions, 24,000 lb rating for air ride suspensions

    Suspension

    Air Ride, Rated @ 25,000# with ABS, available in closed tandem 54”

    Wheels

    8.25 x 17.5 Steel, White powder coat, 10 Holes, nut 33mm

    Landing Legs

    Two speed landing legs. Ultimate load capacity 140,000 lbs.

    Mud Flaps

    Anti-sail with Jet Trailers logo, 2 located rear at the rear of trailer on a 49” tandem or both axles on 10'1" spread

    Wire Harness

    Factory sealed with internal ground to reduce corrosion and maintenance.

    LED lights

    Bullet style clearance and marker, Side turn signal, 4” round tail light, license plate light. Long lasting, Reduced maintenance, very bright.

    Corrosion Resistant Paint System

    Trailer is cleaned and chemically treated with a corrosion resistant coating for a matte black finish.

    Axles

    Aluminum Wheels

    Steel Wheels

    Tires

    Tire inflation equalization system

    Liquid-filled Air Gauge

    Dump Valve

    Tire Carrier

    Lower Deck Heights

    Slanted Drops

    Twist Locks

    Sliding Winches

    Winch Straps

    Rope Hooks

    Recessed Tie Downs

    D-Rings

    Marker Lights

    Tail Lights

    Paint Colors

    Axle configuration options include single, closed tandem, tandem spread, triple, triple spread, quadrupedal, or other options.

    Light weight and a better visual appearance. Available in Standard or Extra Polish

    Common options are 8.25 x 22.5 or Wide Base Single Wheels, other sizes or colors available.

    Common options are 11R22.5 Radial Tires or Wide Base Single Tires, other options available.

    Regulates correct and equal tire pressure across all tires. Controls two axles. Triple axles will require and second system.

    Installed in a weather resistant enclosure on the road side of the trailer by the front suspension. Reads pressure from the airbags. Filled with shock absorbing liquid to protect the gauge from vibration.

    Manual dump valve with liquid filled air gauge in a sealed enclosure

    Allows for storage of a spare wheel and tire

    Lower deck heights are optional if increased overall head clearance is required.

    Slanted angle neck of 17º or 45º for easier use of the top deck.

    Twist locks are available for container securing

    Sliding whinches can be mounted the either the road or the curb side of the trailer on the side rails.

    Straps can be added for load securement.

    Rope hooks can be added for load securement.

    Recessed tie downs retract into the deck when not in use.

    D-Rings can be added to the main or upper deck at custom locations.

    Multiple configurations to increase the trailer visibility in the dark. Please contact your sales rep about options.

    Three tail lights are standard. Four are optional. Increases the trailer visibility from the rear.

    Stocking colors are black, slate gray and red, or custom matching is possible.

    Options

    Axles

    Axle configuration options include single, closed tandem, tandem spread, triple, triple spread, quadrupedal, or other options.

    Aluminum Wheels

    Light weight and a better visual appearance. Available in Standard or Extra Polish

    Steel Wheels

    Common options are 8.25 x 22.5 or Wide Base Single Wheels, other sizes or colors available.

    Tires

    Common options are 11R22.5 Radial Tires or Wide Base Single Tires, other options available.

    Tire inflation equalization system

    Regulates correct and equal tire pressure across all tires. Controls two axles. Triple axles will require and second system.

    Liquid-filled Air Gauge

    Installed in a weather resistant enclosure on the road side of the trailer by the front suspension. Reads pressure from the airbags. Filled with shock absorbing liquid to protect the gauge from vibration.

    Dump Valve

    Manual dump valve with liquid filled air gauge in a sealed enclosure

    Tire Carrier

    Allows for storage of a spare wheel and tire

    Lower Deck Heights

    Lower deck heights are optional if increased overall head clearance is required.

    Slanted Drops

    Slanted angle neck of 17º or 45º for easier use of the top deck.

    Twist Locks

    Twist locks are available for container securing

    Sliding Winches

    Sliding whinches can be mounted the either the road or the curb side of the trailer on the side rails.

    Winch Straps

    Straps can be added for load securement.

    Rope Hooks

    Rope hooks can be added for load securement.

    Recessed Tie Downs

    Recessed tie downs retract into the deck when not in use.

    D-Rings

    D-Rings can be added to the main or upper deck at custom locations.

    Marker Lights

    Multiple configurations to increase the trailer visibility in the dark. Please contact your sales rep about options.

    Tail Lights

    Three tail lights are standard. Four are optional. Increases the trailer visibility from the rear.

    Paint Colors

    Stocking colors are black, slate gray and red, or custom matching is possible.

    Specifications
    • Trailer Type
    • Steel
    • Trailer Length
    • 53'
    • Trailer Width
    • 102”
    • Drop Height
    • 37"
    • Upper Deck Length
    • 8'-11"
    • King Pin Setting
    • 15”
    • Suspension
    • Tandem Axle Air Ride
    • Axle Configuration
    • 54” Center Spacing
    • Wheels
    • (8) 17.5” x 6.75” Steel
    • Tires
    • (8) 235/75R 17.5 Radials
    • Brakes
    • 16 1/2" x 7", 2S1M ABS

    typical or approximate specification, may vary with specific options

    Line Drawings
    Gallery
    Trailer Products