TILE HAULING TRAILERS
Jet Company is a leading manufacturer of Tile trailers for the agricultural industry. Fact is, farm tile is large and bulky. It requires space, but not a lot of capacity. Jet's tile hauling trailers are designed with a 53' single axle flatbed trailer that slants all the way to the rear for easy unloading.
All trailer designs are custom and made to order.
TrailersFor Sale
Request A Quote
Fill out this form, or call
(515) 332-3117 for a quote.
Frame Construction
Crossmembers
Siderail
Rubrail
Stake Pockets
Kingpin
Axles
Suspension
Wheels
Liquid-filled Air Gauge
Landing Legs
Decking
Kneebraces
Dock Bumpers
Mud Flaps
Wire Harness
LED lights
Corrosion Resistant Paint System
Two Fabricated High Strength Steel I-Beams. Automatically Welded, top, bottom, and both sides.
Steel: Structural High Strength 4” I-Beam, welded to the main beam, on 16", 14” or 12” centers standard. Aluminum Combo: Structural aluminum I-Beams, bolted to main beams, 16", 14” or 12” centers standard.
Steel: 6" steel channel, 8.2 lbs./ft. Aluminum Combo: 6" side high strength aluminum extrusion, The siderail is the winch track on both sides.
Steel: 3/8" x 2" steel. Aluminum Combo: 3/8" x 2-1/2" high strength aluminum extrusion
Spaced 24" on center with pipe-spool. ID 1-5/8" x3-7/16" is common, other spacing and configurations available.
30” setting standard. Other settings available.
30” rear axle setting, Hub Pilot, Axle Beam ratings: 22,500 lb rating for spring suspensions, 24,000 lb rating for air ride suspensions
Air Ride, Rated @ 25,000# with ABS, available in closed tandem (49”) or 10'1" spread. Spring suspension available in closed tandems.
Steel, White powder coat, 10 Holes, nut 33mm
Installed in a weather resistant enclosure on the road side of the trailer by the front suspension. Reads pressure from the airbags. Filled with shock absorbing liquid to protect the gauge from vibration.
Two speed landing legs. Ultimate load capacity 140,000 lbs.
Steel: 1-1/8" apitong is typical. Aluminum Combo: 1-1/4" extruded aluminum is typical, other options available. 5/16" zinc plated floor screws. 2" nominal oak is also available
Kneebraces are located approximately on 4' centers, supporting outside rail, primarily located between the landing legs and the suspension.
Heavy duty rubber dock bumpers, located on outside corners.
Anti-sail with Jet Trailers logo, 2 located rear at the rear of trailer on a 49” tandem or both axles on 10'1" spread
Factory sealed with internal ground to reduce corrosion and maintenance.
Bullet style clearance and marker, Side turn signal, 4” round tail light, license plate light. Long lasting, Reduced maintenance, very bright.
Trailer is cleaned and chemically treated with a corrosion resistant material for a matte black finish.
Frame Construction
Two Fabricated High Strength Steel I-Beams. Automatically Welded, top, bottom, and both sides.
Crossmembers
Steel: Structural High Strength 4” I-Beam, welded to the main beam, on 16", 14” or 12” centers standard. Aluminum Combo: Structural aluminum I-Beams, bolted to main beams, 16", 14” or 12” centers standard.
Siderail
Steel: 6" steel channel, 8.2 lbs./ft. Aluminum Combo: 6" side high strength aluminum extrusion, The siderail is the winch track on both sides.
Rubrail
Steel: 3/8" x 2" steel. Aluminum Combo: 3/8" x 2-1/2" high strength aluminum extrusion
Stake Pockets
Spaced 24" on center with pipe-spool. ID 1-5/8" x3-7/16" is common, other spacing and configurations available.
Kingpin
30” setting standard. Other settings available.
Axles
30” rear axle setting, Hub Pilot, Axle Beam ratings: 22,500 lb rating for spring suspensions, 24,000 lb rating for air ride suspensions
Suspension
Air Ride, Rated @ 25,000# with ABS, available in closed tandem (49”) or 10'1" spread. Spring suspension available in closed tandems.
Wheels
Steel, White powder coat, 10 Holes, nut 33mm
Liquid-filled Air Gauge
Installed in a weather resistant enclosure on the road side of the trailer by the front suspension. Reads pressure from the airbags. Filled with shock absorbing liquid to protect the gauge from vibration.
Landing Legs
Two speed landing legs. Ultimate load capacity 140,000 lbs.
Decking
Steel: 1-1/8" apitong is typical. Aluminum Combo: 1-1/4" extruded aluminum is typical, other options available. 5/16" zinc plated floor screws. 2" nominal oak is also available
Kneebraces
Kneebraces are located approximately on 4' centers, supporting outside rail, primarily located between the landing legs and the suspension.
Dock Bumpers
Heavy duty rubber dock bumpers, located on outside corners.
Mud Flaps
Anti-sail with Jet Trailers logo, 2 located rear at the rear of trailer on a 49” tandem or both axles on 10'1" spread
Wire Harness
Factory sealed with internal ground to reduce corrosion and maintenance.
LED lights
Bullet style clearance and marker, Side turn signal, 4” round tail light, license plate light. Long lasting, Reduced maintenance, very bright.
Corrosion Resistant Paint System
Trailer is cleaned and chemically treated with a corrosion resistant material for a matte black finish.
Axles
Axles, Lift Kit
Axles, Sliding Tandem
Integrated Axle and Suspension
Disc Brakes
Aluminum Wheels
Steel Wheels
Tires
Tire inflation equalization system
Liquid-filled Air Gauge
Dump Valve
Tire Carrier
Coil Package
Lower Deck Heights
Bulk Head
Aluminum Tool Boxes
Twist Locks
Sliding Winches
Winch Straps
Rope Hooks
Recessed Tie Downs
D-Rings
Marker Lights
Tail Lights
Paint Colors
Axle configuration options include single, closed tandem, tandem spread, triple, triple spread, quadrupedal, or other options.
Either regulated or non regulated lift axles with control box. Can be installed for any axle in several combinations (Front, Middle and/or Rear)
Slider boxes are optional or closed tandems. Also the front or the rear axle can install as a slider on a tandem 10' 1” spread.
Lighter weight than the standard axle and suspension mount.
Disc Brakes are an available option to the standard drum brake.
Light weight and a better visual appearance. Available in Standard or Extra Polish
Common options are 8.25 x 24.5 or Wide Base Single Wheels, other sizes or colors available.
Common options are 11R24.5 Radial Tires or Wide Base Single Tires, other options available.
Regulates correct and equal tire pressure across all tires. Controls two axles. Triple axles will require and second system.
Installed in a weather resistant enclosure on the road side of the trailer by the front suspension. Reads pressure from the airbags. Filled with shock absorbing liquid to protect the gauge from vibration.
Manual dump valve with liquid filled air gauge in a sealed enclosure
Allows for storage of a spare wheel and tire
Main Beam, Crossmembers, and kneebraces can be configured for heavy concentrated loads such as steel coils.
Lower deck heights are optional if increased overall head clearance is required.
A bulkhead can be added to the front of the trailer. either bolted on or mounted in welded stake pockets.
Aluminum tool boxes can be mounted outside the main beam.
Twist locks are available for container securing
Sliding whinches can be mounted the either the road or the curb side of the trailer on the side rails.
Straps can be added for load securement.
Rope hooks can be added for load securement.
Recessed tie downs retract into the deck when not in use.
D-Rings can be added to the main or upper deck at custom locations.
Multiple configurations to increase the trailer visibility in the dark. Please contact your sales rep about options.
Three tail lights are standard. Four are optional. Increases the trailer visibility from the rear.
Stocking colors are black, slate gray and red, or custom matching is possible.
Axles
Axle configuration options include single, closed tandem, tandem spread, triple, triple spread, quadrupedal, or other options.
Axles, Lift Kit
Either regulated or non regulated lift axles with control box. Can be installed for any axle in several combinations (Front, Middle and/or Rear)
Axles, Sliding Tandem
Slider boxes are optional or closed tandems. Also the front or the rear axle can install as a slider on a tandem 10' 1” spread.
Integrated Axle and Suspension
Lighter weight than the standard axle and suspension mount.
Disc Brakes
Disc Brakes are an available option to the standard drum brake.
Aluminum Wheels
Light weight and a better visual appearance. Available in Standard or Extra Polish
Steel Wheels
Common options are 8.25 x 24.5 or Wide Base Single Wheels, other sizes or colors available.
Tires
Common options are 11R24.5 Radial Tires or Wide Base Single Tires, other options available.
Tire inflation equalization system
Regulates correct and equal tire pressure across all tires. Controls two axles. Triple axles will require and second system.
Liquid-filled Air Gauge
Installed in a weather resistant enclosure on the road side of the trailer by the front suspension. Reads pressure from the airbags. Filled with shock absorbing liquid to protect the gauge from vibration.
Dump Valve
Manual dump valve with liquid filled air gauge in a sealed enclosure
Tire Carrier
Allows for storage of a spare wheel and tire
Coil Package
Main Beam, Crossmembers, and kneebraces can be configured for heavy concentrated loads such as steel coils.
Lower Deck Heights
Lower deck heights are optional if increased overall head clearance is required.
Bulk Head
A bulkhead can be added to the front of the trailer. either bolted on or mounted in welded stake pockets.
Aluminum Tool Boxes
Aluminum tool boxes can be mounted outside the main beam.
Twist Locks
Twist locks are available for container securing
Sliding Winches
Sliding whinches can be mounted the either the road or the curb side of the trailer on the side rails.
Winch Straps
Straps can be added for load securement.
Rope Hooks
Rope hooks can be added for load securement.
Recessed Tie Downs
Recessed tie downs retract into the deck when not in use.
D-Rings
D-Rings can be added to the main or upper deck at custom locations.
Marker Lights
Multiple configurations to increase the trailer visibility in the dark. Please contact your sales rep about options.
Tail Lights
Three tail lights are standard. Four are optional. Increases the trailer visibility from the rear.
Paint Colors
Stocking colors are black, slate gray and red, or custom matching is possible.
Single Axle Tile Hauler Trailer with optional Beavertail and Belly Box
- Jet Flatbed & Platform Trailers
Single Axle Tile Hauler Trailer with optional Belly Box
- Jet Flatbed & Platform Trailers
