COMBO ALUMINUM FLATBED TRAILERS

Jet Company's Combo Aluminum Platform and Combo Aluminum Flatbed Trailers have been a leader in strength and performance for more than 20 years. The trailer starts with our steel beams. Each beam is a continuous one-piece assembly that is automatically welded on both sides. The trailer capacity is a function of the beam depth and flange size, and is dependent on the max load you intend to trailer.

Aluminum components include the cross-members, side rails, and both front and rear ends of the trailer. This reduces the overall weight of the trailer, allowing for a higher load capacity. Custom trailers are designed and engineered with you, for your specific needs. Popular options for our combo aluminum flatbed trailers include sliding axles, triple and quad axles with lift kits, front bulkhead, tool boxes, winches, and more.

Fill out this form, or call
(515) 332-3117 for a quote.

    Features Options Specifications Line Drawings
    Image Gallery

    Frame Construction

    Crossmembers

    Side Rail, Rub Rail & Stake Pockets

    Kingpin

    Suspension, Axles, & Wheels

    Decking

    Knee Braces

    LED lights & Wire Harness

    Corrosion Resistant Paint System

    Two Fabricated High Strength Steel I-Beams. Precision Automated Welded, top, bottom, and both sides.

    Structural aluminum I-Beams, bolted to main beams, 16", 14” or 12” centers standard.

    Side Rail: 6" tall, high strength aluminum extrusion. The side rail serves as the winch track on both sides.
    Rub Rail: 3/8" x 2-1/2", high strength aluminum extrusion
    Stake Pockets: Standard spacing is 24" apart with pipe-spool. ID 1-5/8" x3-7/16" is common, optional spacing and configurations available.

    30” setting standard. Other settings available.

    Air Ride, Rated @ 25,000# with ABS, available in closed tandem (49”) or 10'1" spread. Optional Spring suspension available in closed tandems.
    Steel Wheels - White powder coat, 10 Holes, nut 33mm
    Popular Options include: Multiple Axle Configurations (Triple and Quad), Lift Axles, Aluminum Wheels, Wide Base Wheels

    1-1/4" extruded aluminum flooring with an apitong wood nailer edge board. Other options available.

    Aluminum Knee Braces are located approximately on 4' centers, supporting outside rail, primarily located between the landing legs and the suspension.

    Bullet style clearance and marker lights, Side turn signal, 4” round tail light, license plate light. Long lasting, Reduced maintenance, very bright. Factory sealed wire harness with internal ground to reduce corrosion and maintenance.

    Trailer is cleaned and chemically treated with a corrosion resistant coating and a black finish.

    Features

    Frame Construction

    Two Fabricated High Strength Steel I-Beams. Precision Automated Welded, top, bottom, and both sides.

    Crossmembers

    Structural aluminum I-Beams, bolted to main beams, 16", 14” or 12” centers standard.

    Side Rail, Rub Rail & Stake Pockets

    Side Rail: 6" tall, high strength aluminum extrusion. The side rail serves as the winch track on both sides.
    Rub Rail: 3/8" x 2-1/2", high strength aluminum extrusion
    Stake Pockets: Standard spacing is 24" apart with pipe-spool. ID 1-5/8" x3-7/16" is common, optional spacing and configurations available.

    Kingpin

    30” setting standard. Other settings available.

    Suspension, Axles, & Wheels

    Air Ride, Rated @ 25,000# with ABS, available in closed tandem (49”) or 10'1" spread. Optional Spring suspension available in closed tandems.
    Steel Wheels - White powder coat, 10 Holes, nut 33mm
    Popular Options include: Multiple Axle Configurations (Triple and Quad), Lift Axles, Aluminum Wheels, Wide Base Wheels

    Decking

    1-1/4" extruded aluminum flooring with an apitong wood nailer edge board. Other options available.

    Knee Braces

    Aluminum Knee Braces are located approximately on 4' centers, supporting outside rail, primarily located between the landing legs and the suspension.

    LED lights & Wire Harness

    Bullet style clearance and marker lights, Side turn signal, 4” round tail light, license plate light. Long lasting, Reduced maintenance, very bright. Factory sealed wire harness with internal ground to reduce corrosion and maintenance.

    Corrosion Resistant Paint System

    Trailer is cleaned and chemically treated with a corrosion resistant coating and a black finish.

    Axles – POPULAR

    Wheels – POPLUAR

    Tire inflation equalization system

    Liquid-filled Air Gauge & Manual Dump Valve

    Coil Package

    Bulk Head

    Aluminum Tool Boxes

    Tail Roll

    Twist Locks

    Sliding Winches & Winch Straps

    Rope Hooks

    Recessed Tie Downs

    D-Rings

    Tire Carrier

    Tail & Marker Lights

    Galvanizing

    Paint Colors

    Axle configuration options include single, closed tandem, tandem spread, triple, triple spread, quadrupedal, or other options.
    Either regulated or non regulated lift axles with control box. Can be installed for any axle in several combinations (Front, Middle and/or Rear)
    Slider boxes are optional on closed tandems. Also the front or the rear axle can install as a slider on a tandem 10' 1” spread.

    Aluminum wheels are available in Standard or Extra Polish. They reduce weight and provide a better visual appearance. Sizes include 8.25 x 24.5 or Wide Base Single Wheels

    Regulates correct and equal tire pressure across all tires. Controls two axles. Triple axles will require and second system.

    Installed in a weather resistant enclosure on the road side of the trailer by the front axle. Gauge reads pressure from the airbags. Filled with shock absorbing liquid to protect the gauge from vibration. Manual dump valve quickly releases the air from the air bags on the suspension.

    Main Beam, Crossmembers, and Knee Braces can be configured for concentrated loads such as steel coils.

    A bulkhead can be added to the front of the trailer, either bolted on or mounted in welded stake pockets.

    Aluminum tool boxes can be mounted outside the main beam, between the landing leg and front axle.

    The tail roll option is ideal for pulling skids onto the trailer.

    Twist locks are available for container securing

    Sliding winches can be mounted the either the road or the curb side of the trailer on the side rails. Straps can be added for additional means to secure a load.

    Rope hooks can be added for additional means to secure a load.

    Recessed tie downs retract into the deck when not in use.

    D-Rings can be added at custom locations.

    Allows for storage of a spare wheel and tire

    Three tail lights are standard. Four are optional. Increases the trailer visibility from the rear. Multiple configurations of marker lights are available to increase the trailer visibility in the dark. 3 per side are typical. Please contact your sales rep about options.

    Galvanizing the trailer before the axles and landing legs are installed allows for extreme corrosion resistance in severe environments.

    Stocking colors are black, slate gray and red, or custom matching to a tractor or company color is possible.

    Options

    Axles – POPULAR

    Axle configuration options include single, closed tandem, tandem spread, triple, triple spread, quadrupedal, or other options.
    Either regulated or non regulated lift axles with control box. Can be installed for any axle in several combinations (Front, Middle and/or Rear)
    Slider boxes are optional on closed tandems. Also the front or the rear axle can install as a slider on a tandem 10' 1” spread.

    Wheels – POPLUAR

    Aluminum wheels are available in Standard or Extra Polish. They reduce weight and provide a better visual appearance. Sizes include 8.25 x 24.5 or Wide Base Single Wheels

    Tire inflation equalization system

    Regulates correct and equal tire pressure across all tires. Controls two axles. Triple axles will require and second system.

    Liquid-filled Air Gauge & Manual Dump Valve

    Installed in a weather resistant enclosure on the road side of the trailer by the front axle. Gauge reads pressure from the airbags. Filled with shock absorbing liquid to protect the gauge from vibration. Manual dump valve quickly releases the air from the air bags on the suspension.

    Coil Package

    Main Beam, Crossmembers, and Knee Braces can be configured for concentrated loads such as steel coils.

    Bulk Head

    A bulkhead can be added to the front of the trailer, either bolted on or mounted in welded stake pockets.

    Aluminum Tool Boxes

    Aluminum tool boxes can be mounted outside the main beam, between the landing leg and front axle.

    Tail Roll

    The tail roll option is ideal for pulling skids onto the trailer.

    Twist Locks

    Twist locks are available for container securing

    Sliding Winches & Winch Straps

    Sliding winches can be mounted the either the road or the curb side of the trailer on the side rails. Straps can be added for additional means to secure a load.

    Rope Hooks

    Rope hooks can be added for additional means to secure a load.

    Recessed Tie Downs

    Recessed tie downs retract into the deck when not in use.

    D-Rings

    D-Rings can be added at custom locations.

    Tire Carrier

    Allows for storage of a spare wheel and tire

    Tail & Marker Lights

    Three tail lights are standard. Four are optional. Increases the trailer visibility from the rear. Multiple configurations of marker lights are available to increase the trailer visibility in the dark. 3 per side are typical. Please contact your sales rep about options.

    Galvanizing

    Galvanizing the trailer before the axles and landing legs are installed allows for extreme corrosion resistance in severe environments.

    Paint Colors

    Stocking colors are black, slate gray and red, or custom matching to a tractor or company color is possible.

    Specifications
    • Trailer Type
    • Combo Aluminum
    • Combo Aluminum
    • Combo Aluminum
    • Combo Aluminum
    • Combo Aluminum
    • Combo Aluminum
    • Trailer Length*
    • 45'
    • 48'
    • 53'
    • 45'
    • 48'
    • 53'
    • Trailer Width*
    • 102"
    • 102"
    • 102"
    • 96"
    • 96"
    • 96"
    • Trailer Ride Height*
    • 48"
    • 48"
    • 48"
    • 48"
    • 48"
    • 48"
    • King Pin Setting*
    • 30"
    • 30"
    • 30"
    • 30"
    • 30"
    • 30"
    • Suspension
    • Tandem Axle Air Ride
    • Tandem Axle Air Ride
    • Tandem Axle Air Ride
    • Tandem Axle Air Ride
    • Tandem Axle Air Ride
    • Tandem Axle Air Ride
    • Axle Configuration
    • 10' 1” Spread Center Spacing
    • 10' 1” Spread Center Spacing
    • 90” Spread Center Spacing
    • 10' 1” Spread Center Spacing
    • 10' 1” Spread Center Spacing
    • 90” Spread Center Spacing
    • Wheels
    • (8) 22.5” x 8.25” Steel
    • (8) 22.5” x 8.25” Steel
    • (8) 22.5” x 8.25” Steel
    • (8) 22.5” x 8.25” Steel
    • (8) 22.5” x 8.25” Steel
    • (8) 22.5” x 8.25” Steel
    • Tires
    • (8) 11R22.5, Radials
    • (8) 11R22.5, Radials
    • (8) 11R22.5, Radials
    • (8) 11R22.5, Radials
    • (8) 11R22.5, Radials
    • (8) 11R22.5, Radials
    • Brakes
    • 16 1/2" x 7", 2S1M ABS
    • 16 1/2" x 7", 2S1M ABS
    • 16 1/2" x 7", 2S1M ABS
    • 16 1/2" x 7", 2S1M ABS
    • 16 1/2" x 7", 2S1M ABS
    • 16 1/2" x 7", 2S1M ABS
    • Weight* (lbs, typical)
    • 9,581
    • 10,252
    • 11,239
    • 9,299
    • 9,951
    • 10,732

    *all specifications typical or approximate may vary with specific options

    Line Drawings
    Gallery
    VIEW STEEL FLATBED TRAILERS Trailer Products